Question 1

Can electric fireplaces be used without heat?

Accepted Answer

Yes, electric fireplaces can operate in flame-only mode without producing heat. This allows you to enjoy the ambience and visual appeal of flickering flames year-round, particularly during warmer months when heating isn't required, making them perfect for creating atmosphere without additional warmth.

Question 2

Are electric fireplaces energy efficient?

Accepted Answer

Electric fireplaces achieve near-perfect efficiency because all electricity consumed converts directly into usable heat. Unlike wood-burning fireplaces that lose substantial heat through chimneys, or gas fireplaces that require venting, electric models retain 100% of generated warmth within your living space.

Question 3

What is the average cost to operate an electric fireplace insert?

Accepted Answer

Electric fireplace inserts  typically cost between $0.10 and $0.23 per hour to operate with heating enabled, depending on your local electricity rate and selected heat setting. Running the flame effect alone for ambience costs just pennies per hour. EcoSmart Fire electric inserts offer two heat settings: 750W for gentle warmth and 1500W for maximum output. At the higher setting, one hour of operation uses 1.5 kWh of electricity, so if your rate is $0.15 per kWh, that's roughly $0.23 per hour. Switch to the lower setting and you halve both energy consumption and cost. What makes electric fireplaces particularly economical is the ability to enjoy the realistic LED flame effect without activating the heater at all. The flame simulation draws minimal power, allowing you to create atmosphere year-round for a fraction of traditional fireplace operating costs. Unlike gas or wood-burning alternatives, there are no ongoing fuel purchases, no flue maintenance, and no efficiency losses up the chimney. Every watt goes directly into your space. The LED lighting system is engineered to last up to 20 years, eliminating bulb replacement costs over the life of the unit. For those seeking the warmth and visual appeal of a fireplace without unpredictable energy bills, electric inserts deliver both control and transparency.

Question 4

Can electric inserts be used without heat for ambiance?

Accepted Answer

Yes, EcoSmart Fire electric inserts operate with independent flame and heat controls, so you can enjoy the visual ambiance without any heating output. This means you can light the flame year-round, creating atmosphere during warmer months when heat isn't needed, then switch to full heating during cooler weather. The Switch Series and Motion Series both feature low-energy LED flame technology that consumes power equivalent to a standard light bulb, producing the visual richness of fire without thermal output. Control is straightforward: adjust flame brightness, colour, and pattern via remote independently of heat settings, or disable heat entirely for pure ambiance mode. Smart home integration on select models (Alexa, Google Home compatible) lets you manage ambiance settings from anywhere. The result is genuinely trans-seasonal functionality, transforming your fireplace insert into a year-round focal point rather than a seasonal feature.

Question 5

Do electric fireplaces need to be vented?

Accepted Answer

No, electric fireplaces do not need to be vented. They operate as vent-free, self-contained units that produce zero emissions, no harmful smoke, or greenhouse gases. Unlike gas or wood fireplaces, electric models require no gas lines, chimneys, or venting systems, making installation simple and versatile.

Question 6

Do electric inserts require special electrical wiring?

Accepted Answer

EcoSmart Fire electric inserts require dedicated hardwired electrical connections installed by a qualified electrician. This hardwired design eliminates visible power cords and enables flush wall integration that preserves your interior design. The wiring specifications depend on your model. 120V inserts use a 3-wire connection (neutral, L1, ground), while 240V inserts require a 4-wire connection (neutral, L1, L2, ground). Both require a minimum 20-ampere dedicated circuit with a 2-pole circuit breaker. Professional installation is a feature of the EcoSmart Fire design philosophy. The hardwired connection eliminates temporary solutions, ensuring your fireplace is integrated as a permanent design element from day one. As of 2026, installation must comply with CSA C22.1 and ANSI/NFPA 70 electrical standards. A qualified electrician will coordinate with your renovation timeline, making the installation straightforward to plan alongside other electrical upgrades. Local codes may specify additional requirements depending on your jurisdiction. Because the fireplace is permanently positioned and connected, you achieve the clean aesthetic of a built-in fireplace without external power cords or fuel supply lines. Precision placement means your designer can specify exact dimensions and positioning, creating a focal point that is integrated into your space, not added to it. Dedicated 20A minimum circuit with 2-pole breaker Professional electrician installation Compliance with local electrical codes and standards (CSA C22.1 / ANSI/NFPA 70)

Question 7

Do electric fireplaces require professional installation?

Accepted Answer

Most electric fireplaces don't require professional installation. Many EcoSmart Fire electric models are designed for simple plug-and-play setup using standard electrical outlets. However, built-in or hardwired installations may need qualified electrical work. Always consult your specific model's installation manual for requirements and local electrical codes.

Question 8

Do electric fireplaces look realistic?

Accepted Answer

Yes, modern electric fireplaces look remarkably realistic thanks to advanced LED technology, 3D flame effects, and holographic innovations. EcoSmart Fire's Motion Picture Flame Technology creates natural-looking, multi-dimensional flames with customisable colours, making them virtually indistinguishable from traditional wood or gas fires.

Question 9

Can you install an electric fireplace in any room of the house?

Accepted Answer

Electric fireplaces cannot be installed in every room due to safety restrictions. Avoid moist environments like bathrooms and laundry rooms, and ensure adequate ventilation. Each unit requires a dedicated 15-amp circuit installed by a qualified electrician, plus proper clearances from combustible materials.

Question 10

Are electric fireplaces energy efficient?

Accepted Answer

Electric fireplaces achieve near-perfect efficiency because all electricity consumed converts directly into usable heat. Unlike wood-burning fireplaces that lose substantial heat through chimneys, or gas fireplaces that require venting, electric models retain 100% of generated warmth within your living space.

Question 11

Are electric fireplace inserts energy efficient?

Accepted Answer

Yes, electric fireplace inserts are highly energy efficient. They convert virtually 100% of electricity to usable heat, without the energy loss that occurs with gas fireplaces (30–60% efficient) or wood-burning alternatives (25–50% efficient). There is no chimney loss and no wasted energy escaping through flues. EcoSmart Fire electric inserts deliver efficient heating through zone heating, allowing you to warm a specific area without running your central heating system. This targeted approach reduces overall energy consumption across your home. At 1,500W (120V) or 3,000W (240V), they operate at your chosen heat setting, giving you precise control over energy use. The flame-only mode uses minimal power (45–83W depending on model), comparable to a single light bulb, so you can enjoy the ambience without heating costs. When you activate the heating function, operating costs run approximately USD $0.24 per hour at full heat, based on average 2026 electricity rates. This zone heating efficiency translates directly to reduced energy bills and a smaller environmental footprint.

Question 12

Can electric fireplaces be used without heat?

Accepted Answer

Yes, electric fireplaces can operate in flame-only mode without producing heat. This allows you to enjoy the ambience and visual appeal of flickering flames year-round, particularly during warmer months when heating isn't required, making them perfect for creating atmosphere without additional warmth.

Question 13

Do electric fireplaces look realistic?

Accepted Answer

Yes, modern electric fireplaces look remarkably realistic thanks to advanced LED technology, 3D flame effects, and holographic innovations. EcoSmart Fire's Motion Picture Flame Technology creates natural-looking, multi-dimensional flames with customisable colours, making them virtually indistinguishable from traditional wood or gas fires.

Question 14

What area size can an electric insert heat?

Accepted Answer

EcoSmart Fire electric inserts can provide supplemental warmth for spaces up to approximately 37 square metres [400 sq ft], depending on room insulation, ceiling height, and climate conditions. All EL Series models feature the same 1500W heat output at maximum setting, with a 750W option for gentler warmth. These electric inserts are engineered primarily as design statements that happen to offer comfortable supplemental heating. The 1500W output translates to roughly 5,120 BTU, which delivers meaningful warmth in open-plan living areas without replacing your primary heating system. In well-insulated rooms with standard 2.4-metre [8 ft] ceilings, you'll notice appreciable warmth in the immediate vicinity of the fireplace, typically within a 4.5 to 6 metre [15 to 20 ft] radius. What makes EcoSmart Fire's electric collection distinctive is that heating capacity remains consistent whether you choose the EL40 with its 1016mm [40 in] viewing width or the dramatic EL120 spanning 3048mm [120 in]. This means you can select based purely on visual impact and scale rather than worrying about performance differences. The units plug into a standard dedicated 15-amp circuit, require no venting or gas connections, and produce zero emissions in your living space.

Question 15

What is an electric fireplace insert?

Accepted Answer

There are many types of indoor electric fireplaces, including freestanding and built-in models. EcoSmart Fire’s Electric Fireplace Series is designed to be framed by wood or metal studs and installed into a wall. With low-energy LED flame technology, our electric fireplace inserts resemble an authentic open flame fireplace. Recessed into a wall, the electric fireplace displays sleek linear lines for a luxurious modern finish. An existing gas fireplace or wood-burning fireplace can be converted into an electric fireplace. Please speak with a specialist for more information.

Question 16

How often do I need to change the bulbs on my electric fireplace?

Accepted Answer

Your EcoSmart Fire electric fireplace is equipped with low energy LED Lamps that have a life span of up to 20 years.

Question 17

What maintenance do electric fireplaces need?

Accepted Answer

Electric fireplaces require minimal maintenance compared to traditional fireplaces. Simply dust your EcoSmart Fire electric fireplace regularly to prevent build-up, clean the glass screen with standard glass cleaner, and wipe air inlets/outlets with a soft cloth. Semi-annually, unplug the unit and dust internal components once cooled.

Question 18

Do electric inserts look realistic?

Accepted Answer

Yes. EcoSmart Fire electric inserts deliver remarkably authentic flame effects, with customisable brightness and realistic sound built into the design. Motion Picture Technology and Switch FX Technology create multi-dimensional flames with vibrant, adjustable patterns and authentic wood-crackling sound that convince viewers at first glance. The realism comes from several design elements working together. The LED flame patterns shift and move with genuine visual depth; they're not static images. You can adjust flame brightness, speed, and colour to match your room's aesthetic and lighting. Lower brightness settings create a more believable effect, especially with minimal accent lighting. Sound design makes a crucial difference. Authentic crackling and popping sounds trigger the same response as a real fire. Combined with visual flame movement, most viewers won't question whether it's real. The experience improves with thoughtful room styling. Placing the insert within quality surroundings, using warm accent lighting, and keeping viewing angles at eye level all enhance the visual impression. The toughened glass fire screen and accent lighting controls are engineered to support this integration. Electric inserts won't precisely replicate real wood or gas flames. EcoSmart Fire's technology closes that gap convincingly. The practical advantage: you get the visual warmth and ambience without installation constraints, maintenance demands, or emissions.

Question 19

Do electric fireplaces need to be vented?

Accepted Answer

No, electric fireplaces do not need to be vented. They operate as vent-free, self-contained units that produce zero emissions, no harmful smoke, or greenhouse gases. Unlike gas or wood fireplaces, electric models require no gas lines, chimneys, or venting systems, making installation simple and versatile.

Question 20

Do I need permits to install an electric fireplace?

Accepted Answer

Most electric fireplaces don't require permits since they don't emit smoke or gases and need no chimney or vent. Unlike gas or wood fireplaces, EcoSmart Fire electric models typically plug into standard outlets. However, always check your local building codes, as permit requirements can vary by jurisdiction and installation type.

Electric Fireplaces

Cost-effective alternatives to gas or wood fireplaces

Electric Ranges

Switch Fireplaces

Motion Fireplaces

Design & installation freedom

Energy efficient

Exceptional energy efficiency

Eco-friendly

Smart & easy to use

Trans-seasonal

Related Collections

Learn More